Models Affected by Recall
All Can-Am® Spyder RT Model Year 2020 and 2021 vehicles
Certain Can-Am® Spyder RT Model Year 2022 and 2023 and Ryker Model Year 2022 and 2023 vehicles
Below is a copy of the letter sent to owners of these vehicles.
Brake Lights May Stay Illuminated – Increased Risk of Crash
Dear BRP Customer,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. BRP has decided that the following vehicles fail to conform to Federal Motor Vehicle Safety Standard No. 108, Lamps, reflective devices, and associated equipment. As a result, BRP is conducting a safety recall.
Our records show that you own a potentially affected vehicle.
What is the potential problem?
Potential contamination or component friction in the brake light switch may cause the brake lights to stay illuminated, even when the brake pedal is not pressed. If the brake lights remain illuminated, it can fail to alert other motorists of the rider’s intention and increase the risk of a crash.
Which models are involved?
All Can-Am® Spyder RT Model Year 2020 and 2021 vehicles
Certain Can-Am® Spyder RT Model Year 2022 and 2023 and Ryker Model Year 2022 and 2023 vehicles
What should you do?
Contact immediately your authorized BRP Can-Am dealer and schedule an appointment to have the safety recall performed on your vehicle.
BRP will repair your vehicle at no cost.
For MY20 and MY21 Spyder RT, the repair is to replace the brake light switch, adjust the brake light switch and to add a spring to the brake light switch. The procedure should take less than 2 hours.
For MY22 and MY23 RT, the repair is to add a spring to the brake light switch. The procedure should take less than an hour.
For MY22 and MY23 Ryker, the repair is to adjust the brake light switch and to add a spring to the brake light switch. The procedure should take less than an hour.
Parts will be gradually available starting from April 3, 2023, and will be releasedprogressively upon availability.
If you choose to ride your vehicle before the repair, please verify the brake lights are illuminating properly before you ride. The brake lights should be turned off when the brake pedal is released.
If you leased this vehicle:
Send a copy of this letter to the lessee within ten working days after the day you received this letter.
Do the same with any future letters about this safety recall.
If after contacting your dealer and the Customer Assistance Center you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590, call the toll-free Vehicle Safety Hotline at 1.888.327.4236 (TTY 1.800.424.9153) or go to http://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is 23V175.
If you previously had to repair the brake light switch for this issue and BRP did not cover the cost of the repair, please contact us. BRP will evaluate if you are eligible for a reimbursement of the repair costs. However, your vehicle will still need to have the safety recall repair performed.
What to do if you feel you have received this notice by mistake:
This notice was mailed to you according to the most current information we have available.
If you no longer own this vehicle or some information regarding your name or address are incorrect, please contact BRP at your earliest convenience.
Your safety and continued satisfaction with our products are a priority for us. We apologize for any inconvenience this may cause you and remain committed to facilitating the process as much as we can.
Thank you for your immediate attention to this matter.
Sincerely,
BRP Customer Services Department
If you have questions or need assistance, or to find the nearest authorized BRP dealer:
- Visit www.brp.com
- Or call: 1-888-272-9222 8:00 AM to 8:00 PM Eastern time 7 days a week.